ABOUT SYSTEM

AGREUS® – a wireless Smart Village class system that enables the acquisition of measurement data facilitating agrotechnical decision-making and process control. The system includes dedicated sensors and executive modules and an application available on desktop computers and mobile devices, such as laptops, tablets, or smartphones.

AGREUS® is a comprehensive solution useful in all types of agricultural, horticultural, and forest crops, green areas, orchards, and crops under a cover.

System
System

Communication between the base station, which is the heart of the AGREUS® system, and the sensors occur via the Semtech LoRa® wireless radio network. Depending on the terrain and the height at which the base station is mounted, this technology allows it to cover a large area of crops with low energy consumption, which is crucial for battery or solar-powered devices.

Locations of AGREUS® systems in Poland

LOCATIONS OF AGREUS® SYSTEMS IN POLAND

PRECISE WATERING

AGREUS® SYSTEM ADJUSTS THE AMOUNT OF WATER SUPPLIED TO PLANTS BY TAKING INTO ACCOUNT THE ACTUAL SOIL AND CLIMATIC CONDITIONS.

System operation diagram

ASK FOR AN OFFER

Application

AGREUS® software is available from anywhere globally via a web browser or a mobile application dedicated to Android devices. After creating an account, the user can customize the application's appearance to his needs by defining his desktops and widgets with the data that interests him.

Features

IRRIGATION AND FERTILIZATION MANAGEMENT

AGREUS® is a solution that supports making agrotechnical decisions, in particular, precise irrigation and fertilization based on measurements and analysis of climatic and soil conditions. The user can freely program the sequence of the actions (e.g. irrigation and fertigation) to maintain optimum humidity and salinity in the plant root zone. The system's main elements are precise measuring probes that simultaneously monitor, on one of three levels, such parameters as temperature, humidity, and salinity of soil or horticultural substrates. Thanks to measuring sensors and modern software, AGREUS® is also helpful for controlling plant protection systems against frosts, carrying out plant protection treatments, and other agrotechnical works.

MONITORING OF CLIMATE PARAMETERS

AGREUS® provides information on many climatic parameters, such as air temperature, dew point temperature, wet bulb temperature, relative air humidity, insufficient air humidity, insufficient water vapor pressure, and leaf wetting as well as the probability of disease infection.

The above information makes it easier for the user to make decisions about the need to undertake agrotechnical work, for example, measures to reduce the effects of frosts or the need to apply for plant protection.

MEASURING PARAMETERS OF SOIL OR HORTICULTULAR SUBSTRATE

A unique feature of soil probes is the monitoring of the electrical conductivity of the soil solution (ECw). The electrical conductivity is closely correlated with the content of mineral compounds dissolved in water, both macro and micronutrients, so it indirectly determines the content of fertilizers in the soil solution.

Another parameter monitored by the measuring probes is the mineral content of the soil (MCI), which determines the total content of dissolved mineral compounds per unit volume of soil or horticultural substrates (in grams per liter). These parameters are extremely helpful in conducting precise sprinkling fertilization as well as fertigation.

GENERATING ALARMS AND NOTIFICATIONS

The user defines the events that should generate a notification or alarm and describes the methods of receiving them (notification in the application, SMS, or e-mail sent to the selected address). Alarms can be triggered if the climatic or soil parameters exceed user-defined thresholds, e.g. soil moisture has dropped below a preset level, or the temperature has dropped. The system sends notifications to the user in case of problems with the execution of programmed tasks – schedules or technical issues – low battery in the module, difficulties in communication with the module, etc.

ACCESS TO HISTORICAL DATA

The system stores data from sensors and allows the user to generate reports to compare the same parameter within multiple modules or multiple variables for the same module. The generated report can be downloaded from the system, also in formats that allow data import to spreadsheets and the use of data for advanced analyzes.

AGREUS® IS AN ANSWER TO YOUR NEEDS

System components

AGB-2000 BASE STATION

Stacja Bazowa Nucleus AGB 2000

The base station provides wireless transmission between the measuring and executive modules and the AGREUS® portal operating in the cloud. It is resistant to weather conditions. It has a built-in antenna or an additional external antenna connector.

 

PRODUCT LEAFLET

AM-100 SOIL PROBE

Sonda Glebowa Terra AM 100

The wireless solar-powered sensor measures soil moisture, salinity, and temperature on one or three measurement levels simultaneously. The probe sends the measured soil parameters to the base station.

 

PRODUCT LEAFLET

AM-200 AIR TEMPERATURE AND HUMIDITY SENSOR

Wireless sensor for remote monitoring of temperature, air humidity, and leaf wetting time. Measured parameters taken from the environment are sent to the base station.

 

PRODUCT LEAFLET

AM-401 RELAY MODULE

Sterownik Oswietlenia Lumino AM 401

A module with two outputs that allow you to remotely turn on and off connected devices operating in ON/OFF mode, e.g. control of pumps, windows and doors, fans, and roller shutters. It has galvanic isolation.

 

PRODUCT LEAFLET

AM-411 CONTROLLER OF 24 VAC VALVES

Sterownik Zaworow Valvo AM 411

Wireless module powered by 24 V AC voltage, controlling four solenoid valves via the application. It is possible to automatically adjust established irrigation schedules depending on the course of soil moisture.

 

PRODUCT LEAFLET

AM-421 CONTROLLER OF 9 VDC VALVES

A battery-powered wireless module that controls four valves. It is used to control irrigation in areas without mains supply. It is possible to automatically adjust established irrigation schedules depending on the course of soil moisture

 

PRODUCT LEAFLET

AM-100-7 probe

Sonda

A wireless sensor powered by a CR2032 battery that measures ground moisture and salinity, air temperature and light intensity. The measured parameters are sent to the AM-BLE communication gateway, and next, via LTE to the application.

PRODUCT LEAFLET

AM-600 universal module

Modul-uniwersalny_600

Universal module dedicated to applications related to the automation of work and processes on agricultural and horticultural farms, as well as in the field of forestry and landscape maintenance.

PRODUCT LEAFLET

Frequently Asked Questions

AGREUS® base stations can operate in the so-called roaming, thanks to which, if necessary, more than one device can be used in large farms, thus increasing the coverage of the area with the radio signal. The user does not have to perform any special configuration procedures, and the system itself optimizes the operation of devices in terms of radio signal strength.

The AGREUS® base station is an element necessary to set up an account in the AGREUS® system. The user can extend the set with any modules at any time. For some, it is important to monitor soil parameters and then they will choose one or more of the soil probes. Other Users emphasize process automation, so they can use valve modules that control automatic irrigation on the farm. This does not exclude the fact that both Users can ultimately take advantage of the full range of modules offered within the AGREUS® system.

Of course. The installation process of AGREUS® devices is not complicated. To install the soil probes, a hole saw or a soil drill bit with a diameter of 30-31 mm can be used. The hole made in this way allows the native soil structure to be maintained, which may be important in the case of heterogeneous substrates.

Thanks to a wide range of accessories, the base station can be installed in many places: if equipped with a set of connectors, it can be mounted on a building wall, pole, or mast.

Adding modules to the AGREUS® system, after creating an account in the system, is done by entering the serial number of the product and the activation code (PIN) supplied with the device. After recognizing the module, the application runs the user-friendly wizard that guides you through the installation process step by step, will suggest assigning it to a group, an area, and will allow you to configure the device parameters.

Each account in the AGREUS® system can have many users. Each User has the option of configuring their desktops applying their layout. This means that, for example, one user can look after another user's farm area and use the data of this area on the desktop.

We offer the purchase of equipment through specialized consultants who, apart from installing the solution in the field, orchard, or garden, will configure the entire system following your expectations and give you the finished product, enabling the support of agrotechnical decisions, and thus achieving more efficient crops.

Please contact our sales department, tel. +48 600 477 410, to choose a professional consultant located in your region.